19.11.2026 - Green technology, Transport & logistics

Brimer Group plans €3.5 million expansion in Liepāja

Brimer Liepaja, which is part of the Brimer Group based in Norway, will build a new manufacturing and administrative building in the Port of Liepaja, increasing its production area by approximately 1600 m². The expansion is driven by demand for large-scale glass fibre composite structures, which the company manufactures mainly for marine energy and fish farming. The company plans to put the new building into operation already at the end of summer 2027.

In Latvia, Brimer Group has two production plants – in Liepāja and Saldus. The plant in Liepāja works based on individual orders designing and manufacturing mainly protective structures for underwater oil pipelines and closed fish-growing tanks. In turn, in Saldus the company manufactures various composite products of smaller size, for example, navigation beacons and parts for heavy machinery, as well as a part of the protective structures for underwater oil pipelines.  The company also organises transportation and assembly of its products. 

The new building will be located in the territory of the Liepāja Special Economic Zone (SEZ) at Atslēdznieku iela 37. According to Gatis Ginters, CEO of the company, Brimer Group is planning to invest about EUR 3.5 million in the design, construction and equipment of the new plant. After obtaining a construction permit, the company is planning to start preparations of the construction site at the end of 2026 with active construction works set to begin in early 2027.

Orders will be divided between three workshops

It is planned that the new workshop will house bridge cranes with a lifting capacity of 20 tonnes and production lines for medium-sized structures. The company will continue to produce the largest and heaviest products in the current large workshop, while the first production hangar will be used for smaller orders. Currently about 500-700 tonnes of finished products are manufactured in Liepāja per year. According to Mr Ginters, production could exceed 1000 tonnes per year in 2027.

The company uses vacuum technology for the production of fibreglass structures. “It’s similar to the construction industry – every project is different. Even in one project, almost every product is different, because it needs to be adjusted to the terrain at the installation site. Several identical products are rarely produced, so automation of the manufacturing process is difficult ," Mr Ginters explains. The additional workshop will allow the company to work on several orders of different scale at the same time.

Brimer Liepāja currently employs almost 40 people. As production expands, Mr Ginters estimates that the number of employees at the facility could reach 80. Until now, the company has used mobile modules for its offices and staff rooms, but the new building will not only house the new workshop but will also provide offices, changing rooms and a dining room.

In the new building there will also be a work place for six composite engineers, because Brimer Group is considering the possibility to create a specialised composite engineering department in Liepāja. Its creation would enhance the role of Liepāja plant within the Group as a larger part of the design and product development work could be carried out on site, involving the production team already at the beginning of the development of solutions.

The port allowed for larger orders

Brimer Group’s production in Latvia dates back to the mid-1990s, when entrepreneurs from Norway established the company Norplast in Saldus and started to manufacture glass fibre boats. Later, as demand for large-scale products, including protective structures for underwater pipelines and fish-growing tanks, the company began to search for a venue for its manufacturing operations at the port. Since one-piece structures only up to the width of about 8.5 metres can be delivered to the port from Saldus by road, then in order to fulfil larger orders, the plant had to be located near the berth where finished products can be loaded directly on the ship.

Having assessed their options in several Latvian ports, the company chose one of the terminals offered for sale by the Liepāja SEZ Authority. Initially, the terminal was used to export the structures produced in Saldus, but in 2023 the first manufacturing workshop of approximately 650 m² was built in Liepāja. This allowed the construction of structures up to 15 metres in width. In the next expansion phase, the company invested approximately EUR 2.5 million in another manufacturing building with an area of almost 2000 m². Since 2024, the main shareholder of Brimer Group has been the Swedish private equity investor Accent Equity, which acquired the group from Entec Group.

Main market – Norway

The majority of products manufactured in Liepāja are for Norwegian energy companies, whom the plant supplies with protective structures for underwater oil pipelines to be installed in the North Sea and the Norwegian Sea. One such structure, together with its ballast, weighs around 15-20 tonnes.

The second major area of specialisation of the Liepāja plant is closed fish farming tanks, which allows fish to be grown under controlled conditions. Also in this segment the company works with Norwegian customers, whilst also making deliveries to other markets. For example, one of the containers manufactured so far in Liepāja was delivered to Saudi Arabia. 

Cooperation with Liepāja SEZ and LIAA

Cooperation with Liepāja SEZ is planned to continue also in the current stage of expansion. Brimer Liepaja has concluded an investment agreement with the Liepāja SEZ Authority on the construction of a new manufacturing and administrative building.

As an example of the successful cooperation with state and local authorities, Mr Ginters also notes advice received from the Investment and Development Agency of Latvia (LIAA) on production permits and regulatory requirements. One of the issues that the company has addressed in recent years together with the Latvian Composite Materials Association was the permissible level of styrene emissions in composite materials production. According to Mr Ginters, the unit of measurement was incorrectly indicated in Latvian law – the figure coincided with the figure established in other European Union countries, but due to the different units of measurement the permissible level of emissions in Latvia was much lower. In the company’s opinion, it was almost impossible to meet this requirement in practise. The LIAA Representative Office in Kurzeme advised the company and the Association on the procedure for proposing and directing amendments in order to eliminate this discrepancy.

New markets and opportunities for Latvian plants

Brimer Group is now purposefully expanding its operations in the Middle East and Asia. In order to develop sales in the Gulf Region, a representative office was established in Abu Dhabi in 2026. In turn, a team from the Saldus plant has already been involved in a project carried out by the Group in Japan – the team took part in the assembly of a land-based fish farming system.

Assessing the Group’s development in Latvia, Mr Ginters highlights the cooperation of both plants in the execution of orders for large-scale composite structures as one of the advantages. Liepāja focuses on the production of large structures, while Saldus focuses on production of a wider range of products of various sizes. The company sees the closest direct competitors in this segment of production at the Port of Klaipeda in Lithuania and in Poland. 

“If the project requires an assembly team, we can send it from Saldus or Liepāja to Norway or any other country where the product is to be installed. So we can attract the necessary specialists from several plants for each order,” Mr Ginters explains.

As the group has acquired new markets, Mr Ginters sees an opportunity to expand the specialisation of the Latvian plants as well. One of the directions is the composite structures for places where cables or pipelines intersect on the seabed. For example, supports adapted to the specific installation site allow cables to be positioned at different heights so that they do not come into contact with each other. In developing such solutions, the Liepāja team can use the experience already accumulated in the manufacturing of protective structures for underwater pipelines.

Sign up for newsletters

Stay up to date on the weekly newsletters on recent news and activities.

Subscribe

Sign up for newsletters

Stay up to date on the weekly newsletters on recent news and activities.

Subscribe

Please fill the input fields
Thank you the file has been successfully downloaded
Back